A windows based PC, displaying a dedicated parameter mask, will permit the construction of a charge profile, with up to 5 distinctive phases. Each phase, in turn, may either be assigned current-, voltage- and / or time thresholds and "AmpHour counting", these being the criteria for the change-over to the next phase, "Battery full" detection or auto restart. |
| |
| Product Features: |
| - Soft start phase: if battery voltage < 3.0V/cell |
|
| - Voltage-, current-, or time settings: criteria for phase change |
| - Temp. gradient: charge current is temperature dependent |
| - Charge termination: current-, time or temp. threshold detection |
| - Auto restart criteria: days elapsed or volt. drop across battery |
| l External temperature sensor |
| l LED Indicators for charge status and error diagnostics |
| l Short circuit and reverse polarity protection |
| l Spark suppression at terminal connections |
| |
| |
| Available models |
Specifications |
MEC Article-ID |
Nominal Output Rating
[Cells] [A] |
165-07353-470 |
7 Cells |
35.0A |
165-08303-470 |
8 Cells |
30.0A |
165-09263-470 |
9 Cells |
26.0A |
165-10243-470 |
10 Cells |
24.0A |
165-11223-470 |
11 Cells |
22.0A |
165-12203-470 |
12 Cells |
20.0A |
165-13183-470 |
13 Cells |
18.0A |
165-14173-470 |
14 Cells |
17.0A |
165-15163-470 |
15 Cells |
16.0A |
165-16153-470 |
16 Cells |
15.0A |
|
AC-Input |
Voltage / Frequency |
100-240V / 50/60Hz / Active PFC
|
| Mains |
IEC 320 Terminal |
DC-Output |
Power |
max. 1000W |
| Efficiency |
>87%@230VAC |
| Ripple voltage |
<1% |
| Battery back-discharge current |
<4 mA (with mains disconnected) |
Safety & EMC |
Electrical safety standard |
EN60950 EN60335.2.29 IEC60335.2.29 AS/NZ 3350.2.29 |
| EMC |
EN55014-1/2 EN61000-6-3 EN61000-6-1 |
| Safety Certificates |
CB, CE, AU |
Dimensions |
Size(L x W x H) |
340 x 190 x 75mm, 4.3kg |
|
|
| |
English
