A windows based PC, displaying a dedicated parameter mask, will permit the construction of a charge profile, with up to 5 distinctive phases. Each phase, in turn, may either be assigned current-, voltage- and / or time thresholds and "AmpHour counting", these being the criteria for the change-over to the next phase, "Battery full" detection or auto restart. |
| |
| Product Features: |
| - Soft start phase: if battery voltage < 3.0V/cell |
|
| - Voltage-, current-, or time settings: criteria for phase change |
| - Temp. gradient: charge current is temperature dependent |
| - Charge termination: current-, time or temp. threshold detection |
| - Auto restart criteria: days elapsed or volt. drop across battery |
| l External temperature sensor |
| l "Wake-up" function for battery in sleep-mode |
| l LED Indicators for charge status and error diagnostics |
| l Short circuit and reverse polarity protection |
| l Spark suppression at terminal connections |
| |
| Available models |
Specifications |
MEC Article-ID |
Nominal Output Rating
[Cells] [A] |
165-03113-430 |
3 Cells |
11.0A |
165-04802-430 |
4 Cells |
8.0A |
165-05702-430 |
5 Cells |
7.0A |
165-06602-430 |
6 Cells |
6.0A |
165-07502-430 |
7 Cells |
5.0A |
165-08452-430 |
8 Cells |
4.5A |
|
AC-Input |
Voltage / Frequency |
100-240V / 50/60Hz
|
| Mains |
IEC 320 Terminal |
DC-Output |
Power |
max. 150W |
| Efficiency |
>89%@230VAC |
| Ripple voltage |
<1% |
| Battery back-discharge current |
<4 mA (with mains disconnected) |
Safety & EMC |
Electrical safety standard |
EN60950 EN60335.2.29 IEC60335.2.29 AS/NZ 3350.2.29 |
| EMC |
EN55014-1/2 EN61000-6-3 EN61000-6-1 |
| Safety Certificates |
CB, CE, AU |
Dimensions |
Size(L x W x H) |
180 x 110 x 36mm, 765g |
|
|
| |
English
